PAS0815LS2R5105 [TAIYO YUDEN]
Electric Double Layer Capacitor, 2.5V, 1000000uF;
| 型号： | PAS0815LS2R5105 |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | Electric Double Layer Capacitor, 2.5V, 1000000uF 电容器 |
| 文件： | 总8页 (文件大小：282K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
CYLINDER TYPE POLYACENE CAPACITORS
WAVE
■ FEATURES
■ APPLICATIONS
◦ꢀPolyacene Capacitors can store a large number of ions into its
amorphous structure (doping), therefore Polyacene Capacitors has
much larger capacitance than conventional electric double layer
capacitors.
◦Bꢀ ack-up power source for CPU, microcomputer, and flash memory writing
when shutting off the power.
◦Lꢀ oad change leveling (life lengthening of main power source such as
dry battery, Lithium primary battery)
◦ꢀQuick-charge with ampere measure is possible with its Low internal
resistance.
◦Pꢀ ower source storage combined with solar cell, fuel cell, generator,
and so on.
◦ꢀPossible to charge/discharge more than 100,000 times with
less deterioration caused by charging/discharging compared to
secondary battery which involves chemical reaction, and that enables
to more than 100,000 times charge/discharge and large excellence of
durability for over charge/discharge.
◦Mꢀ ain power source for small devices
ꢀ (Measuring equipments, toys and so on).
◦ꢀPolyacene Capacitors is environmentally friendly power source, which
does not contain any heavy metals such as Cd,Hg and Pb.
ꢀ (RoHS compliant)
■ ORDERING CODE
P A S 0 8 1 5 L S 2 R 5 1 0 5
❶
❷
❸
❹
❺
❻
❶Type
❷Dimensions/
φD [mm]
❸Dimensions/
❹Characteristic Spec
LS Low ESR type
LA High Capacitance type
❺Maximum Usable
Voltage〔V〕
❻Nominal Capacitance〔F〕
L [mm]
example
PAS Polyacene Capacitors
105
〜
10×105μF=1F
08
8.0
10.0
12.5
18
15
15
16
20
35
40
2R3
2.3
〜
10
12
18
16
20
35
40
2R5
3R0
2.5
3.0
（
）
506
50×106μF=50F
※R=decimal point
■ EXTERNAL DIMENSIONS
Part Number
PAS0815LS2R5105
φD
L
15.0
φd
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
P
3.5
8.0
10.0
8.0
Low ESR type
(LS series)
PAS1016LS2R5205
PAS0815LA2R3185
PAS1020LA2R3475
PAS1020LA3R0405
PAS1220LA3R0905
PAS1235LA3R0206
PAS1840LA3R0506
16.0
15.0
20.0
20.0
20.0
35.0
40.0
5.0
3.5
＋
10.0
10.0
12.5
12.5
18.0
5.0
－
5.0
Large Capacitance
type (LA series)
5.0
5.0
8.0
Unit : mm
■ PART NUMBERS
Maximum Usable Voltage
Part Number
Nominal Capacitance (F)
Internal Resistance (mΩ)
(V)
PAS0815LS2R5105
PAS1016LS2R5205
PAS0815LA2R3185
PAS1020LA2R3475
PAS1020LA3R0405
PAS1220LA3R0905
PAS1235LA3R0206
PAS1840LA3R0506
1
2
70
50
Low ESR type
(LS series)
2.5
1.8
4.7
4
1000
300
300
200
100
70
2.3
3.0
Large Capacitance type
(LA series)
9
20
50
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
146
LS Series
■ SPECIFICATIONS
Operating Temp.
Range (℃)
Max. Usable
Voltage (V)
Initial Capacitance
(F)
Initial Internal
Resistance (mΩ)
Part Number
Temperature Characteristics
Lowest temperature (－25℃)
PAS0815LS2R5105
1.0±20%
2.0±20%
Under 70
Capacitance : Over 70% of initial spec.
Internal Resistance : Within 4 times of initial spec.
－25～＋70
2.5
Highest temperature (70℃)
Capacitance, Internal Resistance : Within initial spec.
PAS1016LS2R5205
Under 50
LA Series
■ SPECIFICATIONS
Operating Temp.
Range (℃)
Max. Usable
Voltage (V)
Initial Capacitance
(F)
Initial Internal
Resistance (mΩ)
Part Number
Temperature Characteristics
Lowest temperature (－25℃)
PAS0815LA2R3185
PAS1020LA2R3475
1.8±20%
4.7±20%
Under 1000
Capacitance
: Over 70% of initial spec.
－25～＋60
2.3
3.0
Internal Resistance : Within 4 times of initial spec.
Highest temperature (60℃)
Under 300
Capacitance, Internal Resistance : Within initial spec.
PAS1020LA3R0405
PAS1220LA3R0905
PAS1235LA3R0206
PAS1840LA3R0506
4.0±20%
9.0±20%
20±20%
50±20%
Under 300
Under 200
Under 100
Under 70
Lowest temperature (－25℃)
Capacitance
: Over 70% of initial spec.
－25～＋60
Internal Resistance : Within 4 times of initial spec.
Highest temperature (60℃)
Capacitance, Internal Resistance : Within initial spec.
■ PACKAGING
①Minimum Packing Unit (Plastic Bag)
Minimum
Packing
Standard Inner
Packing Box
quantity
Item
Unit
200
200
100
100
50
PAS0815
PAS1016
PAS1020
PAS1220
PAS1235
PAS1840
10bags
10bags
15bags
10bags
10bags
20bags
2000
2000
1500
1000
500
250
10
200
（
）
180
Standard Inner Packing Box
200mm(W)×330mm(L)×140mm(H)
■ RELIABILITY DATA
Specifications
Items
Test Conditions, Remark
LS Series
－25～＋70℃
2.5V
LA Series
1. Operating Temperature range
2. Max. Usable Voltage
－25～＋60℃
2.3V
3.0V
Capacitance
: Over 70% of initial spec.
Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp.
and measure the floating charge characteristics after returning to normal tem-
perature and humidity.
3. Floating Charge Characteristics Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
Capacitance
: Over 70% of initial spec.
Measure the charge/discharge cycle characteristics after 10000 charge/discharge
cycle at 25±5℃ with under mentioned charge/discharge cycle test condition for
each parts.
4. Charge/Discharge Cycle
Characteristics
Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
Capacitance
Internal Resistance : Within initial spec.
Appearance
: Within initial spec.
Leave the capacitor in an atmosphere of Max Operationg Temperature±2℃ and
ー25±2℃ consecutively for 96 hours each, and return to normal temperature and
humidity.
5. Thermal Durability
6. Humidity Durability
: No noticeable abnormality
Capacitance
Internal Resistance : Within 4 times of initial spec.
Appearance : No noticeable abnormality
: Within initial spec.
Temperature : 40±2℃, Humidity : 90～95%RH Leave the capacitor for 500 hours,
and return to normal temperature and humidity.
No exterior abnormality observed :
initial spec. values retained
Accorging to JIS C 0041
Sine half wave A=294
7. Impact Durability
No exterior abnormality observed :
initial spec. values retained
Apply a sine wave vibration of 1.5mm amplitude and frequency 10～55Hz,
for 2 hours per each direction (X, Y and Z), total 6 hours.
8. Vibration Durability
Material
: Sn-3Ag-0.5Cu
Capacitance
Internal Resistance : Within initial spec.
Appearance
: Within initial spec.
Solder bath temperature : 260±5℃
9. Soldering
Dipping time : 10±1 sec.
: No noticeable abnormality
Dipping depth : 1.5～2mm from cell body
◦Charge/Discharge Cycle Test Condition
PAS0815
LS2R5105
PAS1016
LS2R5205
PAS0815
LA2R3185
PAS1020
LA2R3475
PAS1020
LA3R0405
PAS1220
LA3R0905
PAS1235
LA3R0206
PAS1840
LA3R0506
Part Number
Charging Voltage (V)
Charging Time (s)
2.5
10
1
2.5
10
1
2.3
10
1
2.3
10
1
3.0
30
2
3.0
30
3
3.0
30
5
3.0
30
10
2
Max. Charging Current (A)
Discharging Current (A)
Cut off Voltage (V)
1
1
1
1
0.5
1.5
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
147
CYLINDER TYPE PAS CAPACITOR
■PACKAGING
①Minimum Packing Unit (Plastic Bag)
Item
Minimum Packing Unit
Standard Inner Packing Box quantity
PAS0815
PAS1016
PAS1020
PAS1220
PAS1235
PAS1840
200
200
100
100
50
10 bags
10 bags
15 bags
10 bags
10 bags
20 bags
2000
2000
1500
1000
500
10
200
Standard Inner Packing Box
200mm(W)×330mm(L)×140mm(H)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_pack_e-E02R01
CYLINDER TYPE PAS CAPACITOR
■RELIABILITY DATA
1. Operating Temperature range
LR Series
Specified Value
－25～＋60℃
LA Series
2. Max. Usable Voltage
LR Series
2.3V
Specified Value
LA Series
2.3V
3.0V
3. Floating Charge Characteristics
LR Series
Capacitance
: Over 70% of initial spec.
: Within 4 times of initial spec.
: No noticeable abnormality
Specified Value
LA Series
Internal Resistance
Appearance
Test Methods and Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp.
Remarks and measure the floating charge characteristics after returning to normal temperature and humidity.
4. Charge/Discharge Cycle Characteristics
LR Series
Capacitance
: Over 70% of initial spec.
: Within 4 times of initial spec.
: No noticeable abnormality
Specified Value
LA Series
Internal Resistance
Appearance
Leave the capacitor in an atmosphere of 60℃±2℃ and －25±2℃ consecutively for 96 hours each, and return to normal temperature
and humidity.
Charge/Discharge Cycle Test Condition
PAS0815
PAS1016
PAS0815
PAS1020
PAS1220
PAS1235
Part Number
Charging Voltage (V)
LR2R3105
LR2R3205
LA2R3185
LA2R3475
LA2R3106
LA2R3226
2.3
10
1
2.3
10
1
2.3
10
1
2.3
10
1
2.3
10
1
2.3
10
1
Charging Time (s)
Max. Charging Current (A)
Discharging Current (A)
Cut off Voltage (V)
1
1
1
1
1
1
Test Methods and
Remarks
1.5
1.5
1.5
1.5
1.5
1.5
PAS1840
PAS1020
PAS1220
PAS1235
PAS1840
Part Number
LA2R3566
LA3R0405
LA3R0905
LA3R0206
LA3R0506
Charging Voltage (V)
Charging Time (s)
2.3
30
5
3
3
30
3
3
30
5
3
30
10
2
30
2
Max. Charging Current (A)
Discharging Current (A)
Cut off Voltage (V)
5
0.5
1.5
1
1
1.5
1.5
1.5
1.5
5. Thermal Durability
Specified Value
LR Series
LA Series
Capacitance
: Within initial spec.
Internal Resistance
Appearance
: Within initial spec.
: No noticeable abnormality
Test Methods and Leave the capacitor in an atmosphere of 60℃±2℃ and －25±2℃ consecutively for 96 hours each, and return to normal temperature
Remarks
and humidity.
6. Humidity Durability
Specified Value
LR Series
LA Series
Capacitance
: Within initial spec.
Internal Resistance
Appearance
: Within 4 times of initial spec.
: No noticeable abnormality
Test Methods and
Remarks
Temperature : 40±2℃, Humidity : 90～95%RH Leave the capacitor for 500 hours, and return to normal temperature and humidity.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_reli_e-E02R01
7. Impact Durability
Specified Value
LR Series
LA Series
No exterior abnormality observed : initial spec. values retained
Test Methods and According to JIS C 0041
Remarks
Sine half wave A=294
8. Vibration Durability
Specified Value
LR Series
LA Series
No exterior abnormality observed : initial spec. values retained
Test Methods and
Remarks
Apply a sine wave vibration of 1.5mm amplitude and frequency 10～55Hz, for 2 hours per each direction (X, Y and Z), total 6 hours.
9. Solder Heat Resistance
LR Series
Capacitance
: Within initial spec.
Specified Value
Internal Resistance
Appearance
: Within initial spec.
LA Series
: No noticeable abnormality
Material
: Sn-3Ag-0.5Cu
Test Methods and Solder bath temperature
: 260±5℃
Remarks
Dipping time
: 10±1 sec.
Dipping depth
: 1.5～2mm from cell body
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_reli_e-E02R01
CYLINDER TYPE PAS CAPACITOR
■PRECAUTIONS
1. Use under the maximum usable voltage
If over maximum usable voltage is applied, it might cause abnormal current flow, which shorten lifetime and sometimes damage PAS capacitor.
2. Use under maximum operating temperature
Not only shorter life time but also leakage and damage will happen by increasing internal pressure if PAS capacitor use in over max operating temperature.
3. Limited life time
Lifetime of PAS capacitor is greatly affected by surrounding temperature. 10℃ drop in temperature extend its expected lifetime approximately twice as
much. Design a circuit under consideration of deterioration of electrical characteristics after long time usage, decreasing in capacitance and increasing in
internal resistance.
4. The electrical characteristics of capacitors vary with respect to temperature
The electrical characteristics of PAS capacitors temporarily vary with respect to temperature separately from secular change mentioned above. Design a
circuit under consideration of temperature characteristics.
5. PAS capacitor has polarity
PAS capacitor has polarity. Please check the polarity before use. It will be damaged if it is reversely charged.
6. Mind high ripple current or rapid charge / discharge
In circuit with high ripple current or rapid charge / discharge, the lifetime of PAS capacitors might be shortened by self-heating.
7. Mind voltage drop when discharging
When back-up (discharging) starts, voltage drop because of active current and internal resistance.
8. Series connection
In case of using PAS capacitor in series connection, the voltage of each capacitor is not always equal and it may be occurred excessive voltage in a part of
capacitor, which may lead to shortening lifetime and breakdown. Take a margin against a rated voltage or add a balancing resister.
9. PAS capacitor has the pressure release vent
In case of inside pressure of capacitor excessively rising, the pressure release vent will be opened in order to release inner gas. Following clearance
(Diameter<φ 18：over 2mm, Diameter≧φ18：over 3mm) should be made above the pressure release vent.
Don’t set up wiring or a pattern in the upper part of the pressure release vent, so that the high temperature gas is gushed when the pressure release vent
open.
The product which open the pressure release vent can not use.
10. The sleeve of the PAS capacitor is not guaranteed insulation
Short circuit might happen if circuit pattern is set underneath of PAS capacitor or it fixed by a metal or it contact with other component.
11. Environmental of usage
In case PAS capacitor is used in the high humidity, alkaline or acid air, it may cause deterioration of its performance, electrolyte leak and short circuit by
corrosion of outer can or lead terminal.
In addition, used in sudden temperature change or high humidity, it may cause deteriorating of its performance and electrolyte leak by dew condensation.
12. Don’t apply shock and vibration or pressure
PAS capacitor is sensitive to shock. Don’t drop PAS capacitor and not apply strong pressure to a body, terminals and lead. Soldering part or lead terminal
might be damaged if applying vibration, shock and stress such as pinch, tip, push and twist after installed.
13. Soldering
If next each item is not minded, it may cause deteriorating of its performance, leakage, shortening lifetime.
● Don’t contact solder iron to a cell body.
● Don’t solder over solder conditions in the spec sheet.
14. Cleaning condition when cleaning circuit-board after soldering
Cleaning may affect PAS capacitor. Consult us about cleaning conditions beforehand.
Some cleaning conditions cause detrimental influence.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_prec_e-E02R01
15. Storage
Keep following cautions for storage of PAS capacitor.
● Don’t store in the high temperature, the high humidity condition and a place where receiving direct sunlight. Storing PAS capacitor in the room condition
of 10℃ - 35℃ and less than 65% relative humidity is recommended. Sudden temperature change or high humidity may cause deteriorating of its
characteristics and Soldering.
● Don’t store PAS capacitor near water, salt water or oil, and it the dew condensation, gasified oil or salinity filled place.
● Don’t store PAS capacitor in the hazardous gas (hydrogen sulfide, sulfurous, chlorine , ammonia, bromine, methyl bromine and etc).
● Don’t fumigate by halogen fumigant.
● Don’t store PAS capacitor near acid or alkaline solvent.
● Don’t store PAS capacitor in a place where exposed to ozone, ultraviolet or x-ray.
● Don’t store PAS capacitor in a place where vibration and shock might occur in.
16. Disposal
Dispose PAS capacitor in accordance with local and country rules and regulations.
17. Usage
PAS capacitor is developed on the assumption of the memory-backup & RTC for usage of information & communication equipment, home electronics, audio
& visual equipment, office equipment and etc. Consult us about using high reliability and safety required products such as medical equipment, transportation
equipment, industrial equipment, flight / space equipment and emergency equipment.
18. Other Notice
● Don’t heat or throw PAS capacitor into fire.
● Don’t short.
● Don’t solder directly to a cell body.
● Don’t open a body
● Don’t deform.
● Don’t apply pressure.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_prec_e-E02R01
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明